10G-BX-D Tx1330 / Rx1270 SM LC Simplex (BiDi) SFP+ Transceiver with DDM – 20KM – FSPP-H8-C33-20D-

• Compatible with 3ae 10GBASE-BX(BR)

• Compliant with CPRI Option 7, 8

• Compliant with SFF-8431 SFP+ MSA

• Support 5Gb/s to 11.32Gb/s Multi-Rate

• Hot Pluggable

• 1330nm DFB laser transmitter

• Simplex LC connector

• 2-wire interface for management and diagnostic monitor compliant with SFF-8472

• Single +3.3V power supply

• Link distance 20km over SM fiber

• RoHS Compliant

Compare Compare

FSPP-H8-C33-20D Small Form Factor Pluggable SFP+ transceivers are compliant with the current SFP+ Multi-Source Agreement (MSA) Specification. The high performance uncooled 1330nm DFB transmitter and high sensitivity PIN receiver provide superior performance for 10GBASE Ethernet applications up to SMF 20km optical links.

Applications:

• 10GBASE-BX(BR) Ethernet @10.3125G

• Fiber Channel 800-SM-LC-L 8GFC @8.5G, 1200-SM-LL-L 10GFC @10.51875G

• SONET OC-192 & SDH STM-64 @9.953G

• CPRI Option #7 @9.83G, #8 @10.1376G

• OTN OTU2 @10.7G, OTU2e @11.09G, OTU2f @11.32G

Absolute Maximum Ratings:

Parameters Symbol Min. Max. Unit
Storage Temperature TST -40 +85 °C
Storage Relative Humidity RH 5 95 %
Supply Voltage VCC -0.5 +4.0 V

Recommended Operating Conditions:

 

Parameters Symbol Min. Typ. Max. Unit
Case Operating Temp. (FSPP-H8-C33-20D) TOP 0 +70 °C
Case Operating Temp. (FSPP-H8-C33-20Di) TOP -40 +85 °C
Supply Voltage VCC +3.13 +3.3 +3.47 V
Supply Current (FSPP-H8-C33-20D) ICC 300 mA
Supply Current (FSPP-H8-C33-20Di) ICC 350 mA

Transmitter Electro-optical Characteristics:

VCC= 3.13V to 3.47V, TOP = 0 °C to 70 °C(FSPP-H8-C33-20D); TOP = -40 °C to 85 °C(FSPP-H8-C33-20Di)

 

Parameters Symbol Min. Typ. Max. Unit Note
Operating Data Rate DR 8.5 10.3125 11.32 Gb/s
Optical Launch Power Po -2 +3 dBm 1
Optical Center Wavelength λc 1320 1330 1340 nm
Spectral Width (-20dB) Δλ 1 nm
Side Mode Suppression Ratio SMSR 30 dB
Optical Extinction Ratio ER 3.5 dB
Optical Eye Mask IEEE802.3ae
Relative Intensity Noise RIN -128 dB/Hz
Differential Data Input Swing VIN 180 850 mV
TX Disable Input Voltage-Low (TX ON) TDISVL GND 0.8 V
TX Disable Input Voltage-High (TX OFF) TDISVH 2.0 Vcc V
TX Fault Output Voltage-Low (TX Normal) TFLTVL GND 0.8 V
TX Fault Output Voltage-High (TX Fault) TFLTVH 2.0 Vcc V

Note1: The optical power is launched into a 9/125μm single mode fiber.

Receiver Electro-optical Characteristics:

VCC= 3.13V to 3.47V, TOP = 0 °C to 70 °C(FSPP-H8-C33-20D); TOP = -40 °C to 85 °C(FSPP-H8-C33-20Di)

 

Parameters Symbol Min. Typ. Max. Unit Note
Operating Data Rate DR 8.5 10.3125 11.32 Gb/s
Receiver Sensitivity SEN -14.5 dBm 1
Maximum Receive Power PRX_MAX +0.5 dBm 1
Optical Center Wavelength λc 1260 1270 1280 nm
LOS De-Assert LOSD -15.5 dBm
LOS Assert LOSA -30 dBm
LOS Hysteresis LOSHY 0.5 dB
Differential Data Output Swing VOUT 300 900 mV
Receiver LOS Signal Output Voltage-Low LOSVL GND 0.8 V
Receiver LOS Signal Output Voltage-High LOSVH 2.0 Vcc V

Note1: Measured with a PRBS 231-1 test pattern @10.3125Gbps BER<10-12